Old School Brands

The 90's called and asked for an authentic set of GT pads. We answered with the new Flite GT "Mach One" pad set. Replicated from the original GT artwork from the Flite archives for an almost exact reproduction of the originals. Add some flavor and vintage vibes to your GT, whether it was built in 1990 or 2020. Made from our satin finish nylon with hook/loop closure.

3 Piece Sets Include:

• Frame pad: 12" wide, fits 1.25" diameter top tube
• Bar Pad: 9'' wide, fits 3/4" cross bar diameter
• Stem Pad: 12 3/4"

GT licensed items will only be shipped to USA, no internationally shipping is allowed.

Orders received for addresses outside the US will be cancelled.

Made in the USA by Flite. 

The iconic GT Wings pad sets come back home to Flite.  Classic GT style on textured fabric for an authentic 80's look and feel, with a hook/loop closure.

3 Piece Sets Include:

• Frame pad: 12" wide
• Bar Pad: 9'' wide, fits 3/4" cross bar diameter
• Stem Pad: 12 3/4""

Specify top tube size when ordering.  Original size for these is 1" diameter.  Please measure your bike before ordering.  GT made frames with varying diameter tubes over the years. 

GT licensed items will only be shipped to USA, no internationally shipping is allowed.

Orders received for addresses outside the US will be cancelled.

Made in the USA by Flite. 

Reproduced from the "golden era" of GT BMX freestyle, these bad boys are everything you need to touch off that vintage build or juice up your modern ride. You pick if you want a grommet in the stem for your brake cable or no grommet. Made from our textured nylon with a hook/loop closure. 

3 Piece Sets Include:

• Frame pad: 12" wide, fits 1.25" diameter top tube
• Bar Pad: 10'' wide, fits 3/4" cross bar diameter
• Stem Pad: 14""

While these are sized to be era correct, we always suggest measuring your bike.  

GT licensed items will only be shipped to USA, no internationally shipping is allowed.

Orders received for addresses outside the US will be cancelled.

Made in the USA by Flite. 

3 Piece Sets Include:

• Frame pad: 12" wide, fits 1.25" diameter top tube
• Bar Pad: 10'' wide, fits 3/4" cross bar diameter
• Stem Pad: 14""

While these are sized to be era correct, we always suggest measuring your bike.  

GT licensed items will only be shipped to USA, no internationally shipping is allowed.

Orders received for addresses outside the US will be cancelled.

Made in the USA by Flite. 

The Flite Dyno UL number plate is a true-to-form recreation of the original Dyno UL (Ultra Light) plate from the mid-1980s, when freestyle riders still ran number plates and everything was cool!  The original Bob Morales Dyno artwork was used to replicate the exact look and feel. To make those neon colors pop, we did it the hard way by screen-printing the vinyl covers, giving the plates a vivid, high-contrast look. Riveted velcro handlebar attachment.  Cut, shaped, formed and screened by hand by Flite USA, inspired by BMX.  Original Size.

Not available outside of the USA due to licensing restrictions.  

Orders received for addresses outside the US will be cancelled.

The ELF BMX legacy continues. Taking it all the way back to the beginning with the ELF 1983 logo pad set. Original art, original look, original function. The ELF name has always been synonymous with quality, small-batch BMX frames and these pads maintain tradition in every way. Early 80s correct textured nylon covers with hook/loop closures.

3 Piece Sets Include:

• Frame pad: 12" wide, rolled to fit 1" top tube diameter
• Bar Pad: 9" wide, fits 3/4" diameter cross bars
  
• Stem pad: 12 3/4" 
  

Frame Pad Fit Options - Specify the correct size diameter of your top tube when ordering.

See Size Chart above  

Made in the USA by Flite

3 Piece Sets Include:

• Frame pad: 12" wide, fits 1.25" diameter top tube
• Bar Pad: 9'' wide, fits 3/4" cross bar diameter
• Stem Pad: 12 3/4"

GT licensed items will only be shipped to USA, no internationally shipping is allowed.

Orders received for addresses outside the US will be cancelled.

Made in the USA by Flite. 

In cooperation with the GT/Dyno legacy, Flite has recreated the Dyno D2 pad set. Started as a garage brand by freestyle BMX pioneer Bob Morales in the early 80's, the Dyno brand ultimately landed at the GT mothership. The D2 pads were among the original Dyno parts and we are excited to offer these era-correct reproductions.

Produced under license from GT and using the original artwork, these are pure mid-80s freestyle perfection, just right for your vintage or retro Dyno BMX bike.

3 Piece Sets Include:

• Frame pad: 12" wide, fits 1.25" diameter top tube
• Bar Pad: 9'' wide, fits 3/4" cross bar diameter
• Stem Pad: 12 3/4"

GT licensed items will only be shipped to USA, no internationally shipping is allowed.

Orders received for addresses outside the US will be cancelled.

Made in the USA by Flite. 

Remember when CW Racing was tearing up the track?  

If you've been looking for a pad set to complete your build, this is it. Officially licensed, top quality CW Racing pad sets made in the USA by Flite, just like back in the day. Perfect for your CW restoration

3 Piece Sets Include:

• Frame pad: 12" wide, rolled to fit 1" diameter chromoly frames
• Bar Pad: 9'' wide, fits 3/4" diameter cross bar 
• Stem Pad: Short 11", fits old school BMX necks like Pro Neck or Tuff Neck

Made in the USA by Flite

The 80's come alive with the Flite Dyno UL pads. Recreated from the original Dyno artwork, these are meticulously crafted to the coordinate with the DYNO UL plates, with all the quality you've come to expect from Flite USA.  Printed on our textured nylon covers for crisp lines and colors that pop. The perfect fit for your vintage or new Dyno or GT bike.  

DYNO-mite! The Dyno D-1 Stadium Panel number plate goes back to day one of Dyno Designs. Recreated by Flite BMX from Dyno founder Bob Morales' original artwork, these plates are authentic reproductions of the plates from the mid-80s. Classic Dyno checkers graphic printed on heavyweight vinyl, all on durable plastic base that is hand-formed for a perfect fit. Velcro-straps are riveted in place. True to 80s freestyle form in every way.

Made by Flite BMX in the USA.

Not available outside of the USA due to licensing restrictions.  

Orders received for addresses outside the US will be cancelled.

Fuel up! The Flite GT Fueler pad set is the perfect compliment to your 94-96 GT Fueler or a modern re-issue. Recreated from the original GT art films to exacting specs, but using updated materials for a better look, fit & finish. We added a GT logo to the stem pad to liven it up a little too!  

3 Piece Sets Include:

• Frame pad: 12" wide, fits 1.25" diameter top tube
• Bar Pad: 9'' wide, fits 3/4" cross bar diameter
• Stem Pad: 12 3/4"

GT licensed items will only be shipped to USA, no internationally shipping is allowed.

Orders received for addresses outside the US will be cancelled.

Made in the USA by Flite.