All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
The iconic GT Wings pad sets come back home to Flite. Classic GT style on textured fabric for an authentic 80's look and feel, with a hook/loop closure.
3 Piece Sets Include:
Frame pad: 12" wide
Bar Pad: 9'' wide, fits 3/4" cross bar diameter
Stem Pad: 12 3/4""
Specify top tube size when ordering. Original size for these is 1" diameter. Please measure your bike before ordering. GT made frames with varying diameter tubes over the years.
GT licensed items will only be shipped to USA, no internationally shipping is allowed.
Orders received for addresses outside the US will be cancelled.
All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
Spread your wings. The Flite GT Wings donuts capture the essence of the GT BMX. The classic Wings logo combined with colors to transport you through time--freestyle, racing, cruising. From the 80's to infinity. Grab a set and go.
Officially Licensed by GT. Made by Flite in the USA
**GT licensed items will only be shipped to USA, no internationally shipping is allowed. Orders received for addresses outside the US will be cancelled.**
All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
Reproduced from the "golden era" of GT BMX freestyle, these bad boys are everything you need to touch off that vintage build or juice up your modern ride. You pick if you want a grommet in the stem for your brake cable or no grommet. Made from our textured nylon with a hook/loop closure. 3 Piece Sets Include:
Frame pad: 12" wide, fits 1.25" diameter top tube
Bar Pad: 10'' wide, fits 3/4" cross bar diameter
Stem Pad: 14""
While these are sized to be era correct, we always suggest measuring your bike. GT licensed items will only be shipped to USA, no internationally shipping is allowed. Orders received for addresses outside the US will be cancelled. Made in the USA by Flite.
All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
The 90's called and asked for an authentic set of GT pads. We answered with the new Flite GT "Mach One" pad set. Replicated from the original GT artwork from the Flite archives for an almost exact reproduction of the originals. Add some flavor and vintage vibes to your GT, whether it was built in 1990 or 2020. Made from our satin finish nylon with hook/loop closure.
3 Piece Sets Include:
Frame pad: 12" wide,fits 1.25" diameter top tube
Bar Pad: 9'' wide, fits 3/4" cross bar diameter
Stem Pad: 12 3/4"
GT licensed items will only be shipped to USA, no internationally shipping is allowed.
Orders received for addresses outside the US will be cancelled.
All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
Mid-School re-imagined. The new Flite GT 89-91 pad sets borrow from the past to create a bright new future. We went all-in to painstakingly reproduce the original GT/Dyno artwork onto our classic textured nylon with a hoop/loop closure. One color combo is a dead-on reproduction of the original GT offering and the other, a re-imagined colorway that we feel really captures the GT BMX vibe of the era.
3 Piece Sets Include:
Frame pad: 12" wide, fits 1.25" diameter top tube
Bar Pad: 10'' wide, fits 3/4" cross bar diameter
Stem Pad: 14""
While these are sized to be era correct, we always suggest measuring your bike. GT licensed items will only be shipped to USA, no internationally shipping is allowed. Orders received for addresses outside the US will be cancelled. Made in the USA by Flite.
All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
DYNO-mite! The Dyno D-1 Stadium Panel number plate goes back to day one of Dyno Designs. Recreated by Flite BMX from Dyno founder Bob Morales' original artwork, these plates are authentic reproductions of the plates from the mid-80s. Classic Dyno checkers graphic printed on heavyweight vinyl, all on durable plastic base that is hand-formed for a perfect fit. Velcro-straps are riveted in place. True to 80s freestyle form in every way.
Made by Flite BMX in the USA.
Not available outside of the USA due to licensing restrictions.
Orders received for addresses outside the US will be cancelled.