All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
The iconic GT Wings padset comes back home to Flite. Classic GT style on textured fabric for an authentic 80's look and feel.
Three Piece Set includes:
Frame pad: 12" long, fits 1" diameter tube common on 1980's Cr-Mo frames
Handlebar pad: 9" long
Stem pad: measures 12 3/4" long including tails OR new longer tails for to fit newer bikes on some colors
Specify top tube size when ordering. Original size for these is 1" diameter. Please measure your bike before ordering. GT made frames with varying diameter tubes over the years.
Color options:
Black with GT Yellow
Red with GT Yellow and Blue
Blue with GT Yellow and Red
Chrome with GT Yellow and Blue
Black with GT Yellow and Red - NEW! Longer velcro tails to fit newer bikes too.
White with GT Yellow and Blue - NEW! Longer velcro tails to fit newer bikes too. Not available in 1.5" diameter.
Officially licensed. Made in the USA by Flite.
This product will only be shipped to USA and US Territories only. Orders received for addresses outside the US will be cancelled.
All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
The 90's called and asked for an authentic set of GT pads. We answered with the new Flite GT "Mach One" pad set. Replicated from the original GT artwork from the Flite archives for an almost exact reproduction of the originals. Add some flavor and vintage vibes to your GT, whether it was built in 1990 or 2020. Limited quantities, so don't sleep on these.
Made by Flite in the USA under license from GT BMX. Look for the Flite tag inside.
Three Piece Set includes:
Frame pad: 12" long, fits 1.25" diameter Chromoly frame common on GT bikes of the era
Handlebar pad: 9" long
Stem pad: measures 12 3/4" long including tails.
Please measure your bike before ordering. GT made frames with varying diameter tubes so this size may not fit every GT bike. See Sizing Guide for how to measure.
This product will only be shipped to USA and US Territories only. Orders received for addresses outside the US will be cancelled.
All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
In cooperation with the GT/Dyno legacy, Flite has recreated the Dyno D2 pad set. Started as a garage brand by freestyle BMX pioneer Bob Morales in the early 80's, the Dyno brand ultimately landed at the GT mothership. The D2 pads were among the original Dyno parts and we are excited to offer these era-correct reproductions.
Produced under license from GT and using the original artwork, these are pure mid-80s freestyle perfection, just right for your vintage or retro Dyno BMX bike.
3 Piece set is sized to original dimensions and includes:
9" Bar Pad
12" Frame pad to fit 1.25" diameter top tubes
13.5" stem pad (including tails)
Made in the USA by Flite BMX.
Not available outside of the USA due to licensing restrictions.
Orders received for addresses outside the US will be cancelled.
All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
Reproduced from the "golden era" of GT BMX freestyle, these bad boys are everything you need to touch off that vintage build or juice up your modern ride.
3 Piece set is sized to original dimensions and includes:
10" Bar Pad
12" Frame pad to fit 1.25" diameter top tubes.
14" stem pad (including tails)
While these are sized to be era correct, we always suggest measuring your bike.
These are only available in the 1.25" tube diameter frame pad.
Made in the USA by Flite.
This product will only be shipped to USA and US Territories only.
Orders received for addresses outside the US will be cancelled.
All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
The Flite Dyno UL number plate is a true-to-form recreation of the original Dyno UL (Ultra Light) plate from the mid-1980s, when freestyle riders still ran number plates and everything was cool! The original Bob Morales Dyno artwork was used to replicate the exact look and feel. To make those neon colors pop, we did it the hard way by screen-printing the vinyl covers, giving the plates a vivid, high-contrast look. Riveted velcro handlebar attachment. Cut, shaped, formed and screened by hand by Flite USA, inspired by BMX. Original Size.
Not available outside of the USA due to licensing restrictions.
Orders received for addresses outside the US will be cancelled.
All Flite Bar Pads fit standard 3/4" diameter cross bars.
Standard
9" Wide
The classic BMX Bar pad width
Cruiser
10 3/4" Wide
Extra width for wide bars such as SE Big Honkin' Bars
Frame (Top Tube) Pad Sizes
Standard Flite pads are 12" long unless otherwise noted in the listing
Top Tube Diameter
Top Tube Circumference Outer
1"
3.14"
Classic chromoly fit found on most early 80's bikes
1.25"
3.93"
Larger tube chromoly
1.3"
4.09"
SE Racing bikes with Floval Tubing: 1.5" is best fit
1.5"
4.71"
Aluminum alloy bike frames
*White foam is only available in 1" and 1.25" diameters
Stem Pad Lengths
Standard Flite Sizes
12 3/4"
Including tails
Fits most old school, compact and mid-size stems
15"
Including tails
Long for some modern stems
Reproduction or branded pads may be different sizes to match original specs or specific bike parts.
The 80's come alive with the Flite Dyno UL pads. Recreated from the original Dyno artwork, these are meticulously crafted to the coordinate with the DYNO UL plates, with all the quality you've come to expect from Flite USA. Printed on our textured nylon covers for crisp lines and colors that pop. The perfect fit for your vintage or new Dyno or GT bike.
3 Piece set is sized to original dimensions and includes:
9" Bar Pad
12" Frame pad to fit 1.25" diameter top tubes
12.5" stem pad (including tails)
Made in the USA by Flite BMX.
Not available outside of the USA due to licensing restrictions.
Orders received for addresses outside the US will be cancelled.